Remote gate opener7/23/2023 ![]() Automatic problem gate: the solution to interference The interference problem not only causes the automatic gate to not respond correctly following the command, but in many cases, by continuously receiving signals of the same 433.92 MHz wave, it could open and close continuously during the day and night, also weighing on costs. Other causes that can limit the wave are the presence of telephone repeaters and tower cranes on construction sites. The frequency most prone to this type of problem is 433.92 MHz, because it is occupied by many transmitters that are used every day, such as remote controls for cars and for gates and wireless alarms. ![]() The waves overlap each other and automatically create interference on the automatic gates. It is a classic difficulty that occurs especially in densely populated areas such as apartment buildings, where there are many radio devices that operate on the same frequency. In this case you certainly have a problem with an external interference of radio waves that disturbs the transmission frequency of the remote control which is unable to correctly send the signal to the gate’s electrical control unit.Ī real inconvenience but that can be solved in a short time. ![]() So, you have installed an automation for gates to finally avoid continuously getting off the car and manually opening and closing the gate even in the rain, but you have found yourself in the condition of not being able to operate the mechanism because there is interference at the automatic gate? The set of all electronic equipment traveling along the same frequency very frequently creates problems for your gate automation. Automatic gates have an electric control unit to which different inputs are sent, but t he signal that can have the most problems is the one transmitted by the remote control to the central motor, because it is on a frequency used by many devices.
0 Comments
Leave a Reply. |